Trek Bicycle Computer manual PAIR? signal appears, Screen changes to Pair

Mode Set

Scroll

1.Cycle •Mode to SPEED.

The PAIR? signal appears.

2.Make the wheel sensor send a signal (spin the bicycle wheel).

3.Place the computer within 3 feet (1 meter) of the sensor and hold the Set• button.

The screen changes to PAIR....

4.Release the Set• button.

The computer works for a moment, then returns to the SPEED screen.

If the ERROR screen appears, there may be a problem:

•There is interference (proximity to another signal)

Move away from other computers, cell phones, etc.

•The battery in the sensor is weak

Replace the battery in the sensor- see page 20.

•There is too much distance between the computer and sensor.

Move the computer closer to the sensor.

5.Repeat steps 1-4 in CAD mode (Cadence) while spinning the crankset.

6.Repeat steps 1-4 in HR mode (Heart Rate) while wearing the heart rate strap.

16

Easy setup (ReSet)

06 Incite ACH 07_13.indd 16 7/14/06 7:26:03 AM