Ericsson LBI-39224 manual Unit/Group Location and Unit Logout Dialog Box, 189

LBI-39224

Figure 42 Unit/Group Location and Unit Logout Dialog Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Close
Choose	the	Close	button	to	exit	the

Unit/Group Location and Unit Logout dialog box and return to the CEC/IMC Manager main window.

When the Unit/Group Location and Unit Logout dialog box is open unit location data may be viewed at any time, and when closed the group and site data is cleared. This allows the operator to retrieve an updated snapshot of unit locations when necessary.

The multisite unit logout feature, controlled by the MOM Controller Board, can improve call routing efficiency by logging inactive radio units out of the multisite system. This prevents wide area (multisite) call routing to inactive units which would otherwise unnecessarily delay certain wide area group calls. Multisite Unit Logout has two modes of operation, Timed Logout and Command Logout. These two modes are NOT exclusive; if a situation develops where a unit must be command logged off, this can be done regardless of the Logout Timer status. A brief description of each follows.

3-189