Ericsson LBI-39224 manual Value in USE

							LBI-39224
LOGGED	LOGGED					CAUSE/
WARNING	WARNING				CORRECTIVE
MESSAGE	DATA					ACTION
W15-144:	Data	field	contains		The attempted action was denied
UNAVAILABLE -	Logical ID (in hex) of				because the system was in Failsoft
FAILSOFT PATCH	the	console		that	operation and the Failsoft Patch
	attempted to perform				feature	was not	enabled.	The
	a patch.				system must be returned to trunked
					operation or the Failsoft Patch
					feature license must be installed for
					the patch to succeed.
W16-017:	Switch	ID	that	is	A NIM received a call from another
VALUE IN USE -	duplicated.				CEC/IMC with the same switch ID
MULTINODE					as this CEC/IMC. (Set by the
					MOM Controller Board assignment
					DIP switch). For proper call
					arbitration on a StarGate network,
					each CEC/IMC must have a unique
					switch ID.
W16-129:	The SAID value.				An attempt was made to create a
VALUE IN USE - SAID					patch/simulselect		with a	SAID
VALUE					(System Assigned Group ID) that
					was already being used by another
					patch/simulselect.
W17-120:	(none)				The	MOM	auxiliary	I/O
AUXILIARY I/O -					error/warning alarm list is full.
MOM ERROR ARRAY					This should not normally occur.
					The list has an entry for each
					possible	event.	Corrective
					Action: Reset the MOM and
					resend the auxiliary I/O definitions
					from the CEC/IMC Manager.
W17-130:	This	warning uses			A defined auxiliary I/O event has
AUXILIARY I/O-	specially		formatted		changed states – active to inactive
STATE CHANGE	data to identify			the	or inactive to active. This warning
	event and the current				provides a record of Aux. I/O
	state.				activity and, at the CEC/IMC
					Manager, it may be suppressed for
					any Aux. I/O event.

B-9