Ericsson LBI-39224 manual Dvim Channel Configuration dialog box Save, 139

LBI-39224

DVIM Channel Configuration List dialog box is required to save and send DVIM configurations.

DVIM Channel Configuration dialog box

Save

Choose the Save button to perform an immediate save of the currently selected DVIM channel configuration. Other DVIMs displayed in the list box located at the top of the dialog box are not saved. The channel configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous channel configuration for the DVIM, if present, is erased and replaced with the current channel configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected DVIM channel configurations to be saved as a different DVIM. It is provided to speed configurations when similar configurations are required. Upon choosing Save As… a small dialog box will appear which allows entry of a new DVIM number. Do not type a number in the Save As drop- down list box, the DVIM number must be selected from a number in the drop-down list, the choices displayed are the selected DVIMs in the Configured/Active Sites list box. Like Save, Save As… stores channel configuration on the CEC/IMC Manager server.

Close

Choose the Close button to exit the DVIM Channel Configuration dialog box and return to the DVIM Channel Configuration List dialog box. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit without saving (No), or cancel the Close command and remain in the dialog box (Cancel).

DVIM Channel Configuration List dialog box:

Send

Choose the Send button to send the channel configuration data to the respective DVIM interface module. This procedure must be performed before the DVIM will operate with the new configuration. Only configured and configured-and-active (C and C/A prefixes) configurations may be sent. All configuration data is sent to the MOM

3-139