Ericsson LBI-39224 manual System Time and Date, Line Diagnostic Functions

LBI-39224

GSCMOM.EXE off-line programs as described in Chapter 5, OFF-

LINE DIAGNOSTIC FUNCTIONS.

If data logging is desired, select the Enable Datalog check box. With this feature enabled the CEC/IMC Manager will log GSC traffic such as channel assignments and drops.

The datalog delete threshold feature automatically deletes old datalog files which are stored on the CEC/IMC Manager's hard disk drive. A stored datalog file that is older than the number of days in the Datalog Delete Threshold will be deleted at midnight. This prevents hard disk drive "disk full" errors. Datalog files will also be deleted if the Datalog Delete Threshold number is reduced. For example, if the previous number was "8" (8 days) and the number is reduced to "5" (5 days) in the CEC/IMC Manager Configuration dialog box, the three datalog files that are more than 5 days old will be deleted from the hard disk drive at midnight. The range for the Datalog Delete Threshold number is 1 to 50. The value selected here should be at least equal to the number of days between back-ups of the datalog files such that they are saved before the CEC/IMC Manager automatically deletes them from the hard disk drive. ERROR.DLG and WARN.DLG files are not affected by the Datalog Delete Threshold setting.

OK

Choose the OK button to save any new settings, activate those settings, and exit the CEC/IMC Manager Configuration dialog box.

3.5 SYSTEM TIME AND DATE

This function is used to select the source of system time and date. This time and date is broadcast throughout the entire CEC/IMC for time

synchronization. This function is performed from the Configure System Clock Synchronization dialog box. From the CEC/IMC Manager menu bar select Configure System /

System Options / System Clock to display the Configure System Clock Synchronization dialog box, Figure 9.

3-12