Ericsson LBI-39224 manual NIM Site Selection, NIM Site Channel Configuration List Dialog Box

LBI-39224

LBI-38938,CEC/IMC Digital Audio Switch Installation, Set-up, and Troubleshooting.

NIM "Site" Selection

Prior to actual channel configuration, the interface module to be configured must be selected. From the CEC/IMC Manager menu bar select Configure System / CEC/IMC Configuration / NIM to display the Site Channel Configuration List dialog box for that module.

Figure 20 NIM Site Channel Configuration List Dialog Box

Each Site Channel Configuration List dialog box displays the configurable NIMs and configured/active NIMs. A configured and active NIM represents an active operating control link between the NIM Controller Boards in two networked CEC/IMC switches.

Help

Choose the Help command button to access the Help function. (Help is also available by pressing the F1 key.)

Configurable Sites:

The Configurable Sites list box displays all inactive unconfigured site- type interface modules. If a NIM appears in this box, no channel configuration exists at the CEC/IMC Manager and no active Controller Board control data link exists at the CEC/IMC for the corresponding site assignment number, and the NIM may be selected for configuration. Any number of these available NIMs may be selected at one time to be added to the Configured/Active list box for configuration.

3-48