Ericsson LBI-39224 manual SITE-TYPE Interface Module Channel Configuration, Help

LBI-39224

will greatly increase the number of slots available, and decreasing the number of buses will greatly decrease the number of slots available.

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Cancel

Choose the Cancel button to exit the TDM Bus Configuration dialog box without saving or activating any new settings.

OK

Choose the OK button to save any new settings, activate those settings, exit the TDM Bus Configuration dialog box and return to the CEC/IMC Manager main window.

3.8SITE-TYPE INTERFACE MODULE CHANNEL CONFIGURATION

This section describes channel-related configurations applicable to "site"-type (MIM, NIM, VMIM, PIM and CTIM) interface modules that are performed at the CEC/IMC Manager. NIM, VMIM, PIM and CTIM site-type interface modules do not actually interface with EDACS trunked sites; however, each interface module is assigned a unique site assignment number (1 thru 32). Each interface module type will be discussed separately because, although similar, they do have slight differences and this is an important step in CEC/IMC switch setup. Also, some modules may be equipped with the new T1/E1 Interface Card (currently only MIMs, NIMs, and PIMs may be so equipped). Configuration of both Audio Board-equipped interface modules and T1/E1 Interface Card-equipped interface modules will be covered in those cases.

3-21