Ericsson LBI-39224 manual Manual Entry, Save/Send Timers, Set All Timers to Same, 193

LBI-39224

listed in 15-minute increments from 15 minutes to 24 hours, including No Timeout.

Manual Entry

For timer based unit logout manual entries also can be made. These allow the operator to immediately jump to a unit or group that has a known ID or ALIAS by typing the ID or ALIAS in the appropriate Manual Entry text box instead of scrolling through the list of Aliases. The time-out value also can be manually entered in the Select Timeout field (text box portion of the Select Timeout drop-down list box), the drop-down list will go to the typed-in value; however, the value must be selected with the selection cursor to be recognized as the new time-out value. Enter either the Alias or ID and press the Tab key.

NOTE

The Group and Unit information displayed in their respective fields are not related to each other. The Unit Alias and LID are linked to the list box directly above these fields; the Group Alias and GID are linked to the drop-down list box above and right of these fields.

Save/Send Timers

Choose the Save/Send Timers button to save and send the timers when all the timers are set to the desired values. The transmission of the timers to the MOM Controller Board occurs at a rate of 3/second. The transmission status of the timer database is indicated by either YES (transmitting data) or NO (not or completed transmitting data), displayed below "Busy Transmitting Timers."

Set All Timers to Same

Choose the Set All Timers to Same button if it is necessary to set ALL timers to the same value after setting one timer to the desired value. Choosing Set All Timers to Same will cause ALL timers to be set to this new default timer setting and will transmit the new timers to the MOM Controller Board. The new timer setting becomes the default setting so any new units added to the database will have this default.

3-193