Ericsson LBI-39224 manual Licensed Features, Licensed Capacities

LBI-39224

4.3.1 Licensed Features

Failsoft Patch

This license allows the customer to perform console dispatch patch operations when the system is in Trunked Failsoft operation. A CEC/IMC that is connected to an EDACS basic Failsoft site will be in Trunked Failsoft mode. This feature requires GETC software that supports Failsoft patch and C3 Maestro software 4.0 or later to operate correctly. Leaving this feature disabled at the CEC/IMC is an effective means of preventing Failsoft patch attempts on a system that does not have Failsoft patch capable software at all sites. Patch attempts will be denied consistently until all sites are upgraded, then the license can be installed to enable the feature. This feature is enabled if the check box is selected.

Landline Data

A customer must have this license in order to install an Ericsson Data Gateway (EDG) product in the CEC/IMC. This license is not required for radio to radio RF Data. This feature is enabled if the check box is selected.

Landline Digital

This license allows a customer to perform MultiSite Aegis or Voice Guard calls. This feature also requires DVIM/DVIU channels, StarGate controller, multiple sites capable of digital calls, conventional interface, and at least two digital capable radios and consoles to perform Digital Dispatch or Digital Interconnect calls. Single site radio to radio Aegis or Voice Guard calls do not require a license. This feature is enabled if the check box is selected.

4.3.2 Licensed Capacities

MSC Type

The CEC/IMC may be ordered in several different base configurations for different purposes (CEC or IMC for example). This license is used by the software to determine the current node configuration for CEC/IMC type specific processing. The license must match the ordered node type for all features to operate properly. The node type controller that the CEC/IMC Manager is connected to is indicated by the following table.

4-7