Ericsson LBI-39224 manual Console Privilege Lists, Digital Console Pre-empt, 123

LBI-39224

replaced with the current configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager server, typically local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected console configurations to be saved as a different console. It is provided to speed configurations when similar console configurations are required. Upon choosing Save As… a small dialog box will appear which allows entry of a new console number. Do not type a number in the Save As drop-down list box, the console number must be selected from a number in the drop-down list. Like Save, Save As… stores console configuration on the CEC/IMC Manager server.

Close
Choose	the	Close	button	to	exit	the

C3 Maestro Hardware Configuration dialog box and return to the CEC/IMC Manager main window. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit without saving (No), or cancel the Close command and remain in the dialog box (Cancel).

Digital Console Pre-empt

Digital console pre-empt allows for console pre-empting of digital calls. This feature may require Site Controller or GETC interface and radio software changes, refer to the compatibility matrix in Release Notes 350A1874 for specific information. This feature should be disabled from the CEC/IMC Manager and left in the disabled state. From the CEC/IMC Manager menu bar select Configure System / System Options / Digital Console Pre-emptto display the System Options dialog box. The Digital Console Pre-empt check box should be unselected (unchecked) to disable this feature. Select the check box to enable Digital Console Pre-empt if desired and supported.

3.11.4 Console Privilege Lists

Each console has a privilege list that defines its specific privileges. From this list, a CEC/IMC Manager user can grant or deny a console access to specific units, groups, and conventional channels. For example, a non-supervisory C3 Maestro console which is denied access to a group will not be able to add the group to a module. This function

3-123