LBI-39224
Select All
Choose the Select All button to enable all units to be programmed. All the asterisks on the right should be displayed. This allows the dispatcher to program any unit. This function is handy when only a few units will not be allowed to be programmed. Now only those units that need to be disabled need to be modified.
Save And Send Console Privilege Lists
When the privilege list configuration is complete, the new configuration must be sent to the console before the new configurations will take effect. It is important to save the new configuration to the CEC/IMC Manager hard disk prior to sending it to the console, this ensures that the actual console configuration is the same as the configuration stored on the CEC/IMC Manager hard disk. If after making changes, a send is performed but a save is not, the actual console operation will differ
from the displayed settings upon
Save
Choose the Save button to perform an immediate save of the currently selected console's configuration. Other consoles displayed in the list box located at the top of the dialog box are not saved. The console configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous configuration for the console, if present, is erased and replaced with the current configuration.
Send
Choose the Send button to upload the privilege list data to the console. The console will need to be
Close
Choose the Close button to exit the Console Privilege List dialog box and return to the CEC/IMC Manager main window. Any configurations not saved and sent will be lost unless Save and Send are performed first. If any changes have been made and not saved, you will be prompted (Write Changes to Disk?) to save and exit (Yes), exit
