Panasonic CF-71 manual List of Error Codes, Code Description

List of Error Codes

42

If a problem occurs with your hardware, and [POST Startup Error(s)] is displayed along with the error code(s), follow the on-screen instructions.

Setup: Setup Utility ( page 34) is started. Run [Load Default Settings (PnP)]. Rerun the Setup Utility to input the appropriate operating environment set- tings.

Exit: Ignore the error message(s), and restart the computer.

Code		Description
062	Boot failure--default configuration used	Default configuration in use
101	System Board Failure	Interrupt controller failure
102	System Board Failure	Timer 2 test failure
106	System Board Failure	Diskette controller failure
114	Adapter ROM Error	Adapter ROM checksum error
151	System Board Failure	Real-time clock failure
161	Bad CMOS Battery	Dead battery
162	Configuration Change Has Occurred	Configuration error
162	Configuration Error	CMOS checksum error
163	Date and Time Incorrect	Real-time clock is not updating
173	Configuration Change Has Occurred	ROM configuration has changed
201	Memory Size Error	Memory size/data error
301	Keyboard Error	Keyboard failure
303	Keyboard Error	Keyboard controller failure
604	Diskette Drive Error	Diskette drive 0 failure
605	Diskette Drive Error	Diskette unlocked problem
1780	Hard Disk Error	Fixed disk 0 failure
1800	PCI Error	No more IRQs available
1801	PCI Error	No more room for optional ROM
1802	PCI Error	No more I/O space available
1803	PCI Error	No more memory (above 1 MB) available
1804	PCI Error	No more memory (below 1 MB) available
1805	PCI Error	Checksum error or 0 size optional ROM
1962		An operating system could not be found
8603	Pointing Device Error	Pointing device failure
I9990301		Hard disk failure
I9990305		An operating system could not be found