Security Measures
12
Preventing theft of damage to data using a floppy disk
You may choose to protect the data on your computer from being accessed illegally or overwritten accidentally by using a floppy disk. You can also set your computer to be unbootable from a floppy disk.
Preventing the use of a floppy disk
This error message is displayed when access to the floppy disk drive is attempted.
Procedure
1 Run the Setup Utility ( | page 34) | ||
2 Using | and | , select [Supervisor Setup], then press Enter | |
3 Using | and | , select [Boot Up Drive], then set either [HDD | |
FDD] or [CDD FDD | HDD] with | ||
4
5
Using the 
and 
, select [Floppy Operation], set [Disable]
with 
, then press Esc
Close the Setup Utility (
page 34)
When you do not want your Supervisor Setup changed without permission
Set the Supervisor Password. After it has been set, no changes can be made to the
Supervisor settings unless the password is entered.
When the supervisor password is set
When changing the Supervisor Setup,
if 
is displayed after the power has been
turned on, or if [Enter supervisor password] is
displayed in the Setup Utility (
page 34),
Input the correct supervisor password and press Enter .
When the supervisor password is incorrect or when the user password is entered, (Or, even when the correct supervisor password
is entered). 
page 46
Supervisor Setup
May be
Opened
Supervisor Setup
Can not be Opened
(There are cases in which the Supervisor Setup does
not appear on the main screen). 
page 34
