20
CAUTION
CAUTION
Close the cover
Connector
5
Connect the battery pack
Tab
Pull the tab outside the frame of the computer, and insert the non-
connector-side of the battery pack into the computer with the label-
side up.
Insert the connector-side of the battery pack into the computer to
secure the connector.
Be sure the battery pack is properly connected to the connec-
tor.
If the tab is set under the battery pack, the battery pack will be
difficult to remove later.
Do not touch the battery connector on the computer and flat
cable. The computer may not operate properly.
Press down on these areas firmly.
Label-side up
Close the cover until it clicks into place; be sure the tab does not get
caught when closing the cover.
Battery Power
Flat Cable
When closing the cover;
Be careful not to get your fingers caught in the cover.
There are instances the right side of the cover will float. In such
cases, attempt to close the cover again by putting the projection on
the right side of the cover below the keyboard.
2
6
2
Tab