Panasonic CF-71 manual Key Combinations, Key Functions Popup Window

Key Combinations

2

CAUTION

Do not press the following key combinations repeatedly in (quick) succession.

Do not press the following key combinations while using the touch pad (mouse) or other keys.

Key		Functions				Popup Window
Fn + F2		LCD brightness control	Hold down the Fn key and press F2 to change the				When the bright-
			brightness.				ness is at its maxi-
							mum value.
Fn + F3		Display change	By pressing this key combination when the external
			display is connected, you can select either an exter-
			nal display, LCD or simultaneous. Powering the com-
			puter off and then back on enables the display set-
			ting of the Setup Utility.
Fn + F4		Speakers on/off switch	Pressing this key combination turns off audio from				OFF
			the internal speakers and headphone jack. Pressing
			it again or restarting the computer turns audio back
			on. Pressing it again, or powering the computer off
			and then back on enables the speaker setting of the				ON
			Setup Utility.
			CAUTION
			When disabling the speakers with this key com-
			bination, the warning beep is also disabled.
Fn + F5		Volume control	Pressing this key combination adjusts the volume of				Down
		( down)	the internal speakers and headphone jack.
Fn + F6		Volume control ( up)	NOTE
		Holding down on the keys	This key combination cannot be used to adjust				Up
		changes the sound level.	the volume of the warning beep.
			A dull elongated sound may be heard while
			adjusting the volume.
Fn + F7 *		Power off using the	Pressing this key combination causes the current
		suspend function	screen on the display to be saved to memory, and
			powers off the computer. When the computer is pow-
			ered on again by sliding the power switch or press-
			ing the sleep switch, this save screen will be displayed.
			(The computer must be plugged into the AC adapter
			or have a battery pack with sufficient remaining power
			installed.)
Fn + F8		Power management	Pressing this key combination temporarily disables				Enable
			the power management feature of the Setup Utility.				(Advanced)
		enable/disable switch
			Pressing it again, or powering the computer off and				Enable
			then back on enables the power management set-				(Standard)
			ting of the Setup Utility.	page 16			Disable
							(OFF)
Fn + F9		Remaining capacity of	Pressing this key combination displays the remain-				Remaining
							capacity (%)
		the battery pack	ing battery capacity on the screen.		page 17		display
							Battery pack is
							not installed.
Fn + F10	*	ECO mode for conserv-	Pressing this key combination cuts off power to the
		ing power
			LCD and turns off the hard disk motor until operation
			is resumed by pressing any key.

*When [Disable] is set for [Fn+F7/Fn+F10] with the Setup Utility, these key combinations become inoperable.