Ericsson LBI-39224 manual Save and Send Vmim Configuration, Alc

LBI-39224

ALC

CAUTION

DO NOT enable ALC for any channel if the respective Audio Board part number is 19D903302P1 (any revision).

Automatic Level Control (ALC) provides compensation for signal level variances in a channel line input signal. As required, enable ALC for the selected channel by entering "YES" in the ALC text box or disable it by entering "NO."

Save and Send VMIM Configuration

When channel configuration of the selected VMIM is complete, the Site Channel Configuration dialog box changes must be sent to the CEC/IMC before the changes will take effect. This reprograms the VMIM Controller Boards. However, it is important to save the new configuration prior to sending it to the CEC/IMC because a send will send the last configuration that was saved to disk; saving first ensures that the actual CEC/IMC channel configuration will be the same as the channel configuration stored on the CEC/IMC Manager hard disk. To

save and send configurations, action	is	required first	in	the
Site Channel Configuration dialog	box	and then	in	the
Site Channel Configuration List dialog box.

Site Channel Configuration dialog box

Save

Choose the Save button to perform an immediate save of the currently selected VMIM channel configuration. Other VMIMs displayed in the list box located at the top of the dialog box are not saved. This channel configuration is saved on the CEC/IMC Manager's hard disk drive. Any previous channel configuration for the VMIM, if present, is erased and replaced with the current channel configuration. If the CEC/IMC Manager is running remotely or as a part of the EDACS Network Manager, this configuration is saved on the CEC/IMC Manager server, typically local to the CEC/IMC; it is not saved at the remote location.

Save As...

Choose the Save As… button to allow the currently selected VMIM channel configurations to be saved as a different VMIM. It is provided to speed configurations when similar configurations are required. Upon

3-89