Ericsson LBI-39224 manual Configurable Sites, Configured/Active Sites

LBI-39224

Figure 13 Site Channel Configuration List Dialog Box

(MIM Shown)

Each Site Channel Configuration List dialog box displays the configurable "sites" and configured/active "sites." An active "site" represents an active Controller Board control data link. For example, in the case of a MIM this represents an operating link between an EDACS trunked site and the MIM Controller Board.

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Configurable Sites:

The Configurable Sites list box displays all inactive unconfigured site- type interface modules. If a MIM appears in this box, no channel configuration exists at the CEC/IMC Manager and no active Controller Board control data link exists at the CEC/IMC for the corresponding site assignment number. Any number of these available MIMs may be selected at one time to be added to the Configured/Active list box for configuration.

Configured/Active Sites:

The Configured/Active Sites list box displays "sites" which have been added but not yet channel-configured, "sites" which have had previous channel configurations performed, and "sites" which have been previously channel-configured and have an active Controller Board control data link. Before a site-type interface module can be channel- configured, it must be listed in the Configured/Active Sites list box. Any number of the available "sites" in this list may be selected at one time for modification in the Site Channel Configuration dialog box.

3-24