Ericsson LBI-39224 manual Group Alias, Group ID GID, 137

LBI-39224

this box updates only after Send is performed from the DVIM Channel Configuration List dialog box.

Channel Selection

Select a channel (1 thru 32) for configuration from the CEC/IMC Manager channel list box, only one channel may be selected at a time. The selected channel and its configuration data will displayed in the edit fields above the CEC/IMC Manager list box.

Group Alias

This is the alias associated with the group dedicated to this channel. Select from the drop-down list box. The Channel Equipped field must be set to "Y" to dedicate the channel. A channel that doesn’t have an alias and whose Channel Equipped field is marked "Y" is designated as dynamic and can be used to route digital voice calls for groups that are not dedicated to other channels.

Group ID (GID)

This is the Group ID for the Group that was dedicated to the selected channel in the Group Alias field.

Channel Equipped

A "Y" in this field indicates that the audio channel is connected to a DVIU and can encrypt or decrypt audio. Enter "Y" in this text box to enable the channel for digital voice communications (dedicated or dynamic), enter "N" for unused channels.

Bus/Slot Equipped

Each channel supported by the DVIM requires one bus slot. The ideal configuration would be one slot (channel) per Aegis group, however, this is not a requirement. The DVIM will support both dynamic and dedicated channel allocations. Enter "Y" in the text box to allocate a bus slot, enter "N" for unconfigured channels.

CEC/IMC to Disk

Choose the CEC/IMC to Disk button to transfer the DVIM configuration stored on the DVIM Controller Board at the CEC/IMC to the CEC/IMC Manager hard disk. If the CEC/IMC Manager hard disk database was lost or reset to undesired values, the CEC/IMC to Disk command would restore the CEC/IMC Manager database to that of the DVIM Controller Board.

3-137