Ericsson LBI-39224 manual Board Identification Data, Node ID, Assignment, Version, Errors

LBI-39224

Node ID

This field displays the current hexadecimal GSC address.

Type

This field displays the interface module type: MIM, MOM, etc.

Assignment

This field displays the setting of the interface module's Controller Board dip switches (site assignment number).

Version

This field displays the major and minor version number of the 80C186 software installed in the interface module. Since the version number was not coded into Controller Boards prior to version 2.00, any previous versions (1.00 thru 1.10) of software installed will have "????" displayed in this field.

Error(s)

This field displays the number of errors affecting the interface module when selected. This count will include errors that affect only the current interface module plus the number of global system errors. In some cases the sum of all the values displayed in this field for each individual interface module will be greater than the value displayed in the System Errors field. This will occur whenever a global system error currently exists, each global system error is counted as a single error in the System Errors field and is also counted as a single error in each individual interface module error count. As mentioned previously, this information does not update while viewing this dialog box.

Board Identification Data

The lower half of the Board Identification dialog box contains check boxes for the Controller Board and Audio Boards of the selected interface module. A MIM may have a second, backup, Controller Board, all other modules will have only one. Select a board and follow with a Send to cause the selected board's ID LED to begin flashing immediately. Any board that was unselected will be sent a message clearing its ID LED, if the ID LED was previously flashing it will now turn off. Choose Close to exit this dialog box and turn off all ID LEDs on boards associated with this interface module.

4-5