Ericsson LBI-39224 manual Configured/Active Sites Prefix Definitions, Modify

LBI-39224

All selected MIMs in this list will also be included in the "Save As… " dialog box that is accessed from the Site Channel Configuration

dialog box or T1/E1 Digital Site Configuration dialog box. The

particular state is indicated by a prefix as defined in the following table.

Table 1 Configured/Active Sites Prefix Definitions

PREFIX		MEANING
**	The "site" has been added for
	configuration but is not active and no
	channel	configurations	have	been
	performed or saved.
A	The control data link is active and
	configuration data exists at the
	CEC/IMC (default values if nothing
	else) but not necessarily at the
	CEC/IMC Manager.
C	Channel	configurations	have	been
	performed and saved for the "site"
	but the control data link is not active.
C/A	Channel	configurations	have	been
	performed and saved for the "site"
	and the control data link is active.

Those site-type interface modules followed by "(TEC)" are T1/E1 Interface Card equipped and are configured as described in T1/E1 Interface Card-Equipped MIM Configuration, on page 3-35.

Add

Choose the Add button to move a selected site from the Configurable Sites list box and "add" it to the Configured/Active Sites list box, where it can now be selected for configuration. If upon adding a site, a configuration data file exists on the CEC/IMC Manager's hard disk drive from a previous add and delete, the site will be added to the Configured/Active Sites list box with its configuration data file (with a

**prefix). This previous configuration may be modified, saved, and sent as needed.

Modify

Choose the Modify button to display the Audio Interface Type dialog box, select either Audio Board or T1/E1 Interface Board as required by selecting the appropriate option button. Selecting Audio Board will activate the Site Channel Configuration dialog box, selecting T1/E1

3-25