Ericsson LBI-39224 manual Multiple Remote Clients, Upgrade CEC/IMC Manager

LBI-39224

NOTE

It is important to use the DISKCOPY command when making a backup and not the COPY or XCOPY commands. The diskette contains a volume label that is required for the installation process and COPY and XCOPY do not copy volume labels.

2.5 MULTIPLE REMOTE CLIENTS

The CEC/IMC Manager Remote Client (W_GUI.exe) can be executed from any PC that is running Windows NT v3.51 or better and connected to the same LAN as the desired CEC/IMC Manager server. A maximum of ten (10) remote clients are supported.

Single CEC/IMC Manager (No LAN)

NO command line options are necessary for the Local CEC/IMC Manager if the default machine name was selected for the Local CEC/IMC Manager machine (default = "MOM_NT").

Multiple CEC/IMC Managers on LAN

If ANY other machine name is used other than the default machine name (default = "MOM_NT"), the following action must be performed. Depending on the LAN Transport one of the following "command line options" MUST be added to the File/Properties dialog box:

COMMAND LINE OPTIONS for Remote Client (network connection)

W_GUI.exe <machine name> Networks without TCP/IP

W_GUI.exe <IP address> TCP/IP networks

See Figure 1 in the following chapter for an example of a CEC/IMC Manager on a TCP/IP network, the IP address is displayed in the CEC/IMC Manager main window title bar. Figure 3 is an example of a CEC/IMC Manager set up as a single (Local) CEC/IMC Manager.

2.6 UPGRADE CEC/IMC MANAGER

NOTE

Ensure that the requirements of MULTIPLE REMOTE CLIENTS (Step 2.5 above) are fulfilled before proceeding.

2-3