Ericsson LBI-39224 manual Audio Interface Type Selection, Audio Board option

LBI-39224

Interface Board will activate the T1/E1 Digital Site Configuration dialog box. These options are discussed in detail in subsequent sections.

Delete

Choose the Delete button to remove ("delete") a selected configured or unconfigured site from the Configured/Active Sites list box to the Configurable Sites list box. Configured-and-active sites (C/A prefix) cannot be "deleted." This delete function does not remove "site" channel configuration files from the CEC/IMC Manager's hard disk drive. Therefore, if the "deleted" site is subsequently added back to the Configured/Active Sites list box using the Add button, the previous channel configuration is not lost (this configuration data must be re- saved in the Site Channel Configuration dialog box before it can be resent to the CEC/IMC).

Close

Choose the Close button to exit the dialog box and return to the main menu. Any "**" (unconfigured and unsaved) sites appearing in the Configured/Active Sites list box will be removed and returned to the Configurable Sites list box.

Audio Interface Type Selection

For those site-type interface modules that may be equipped with either an Audio Board or T1/E1 Interface Card (currently only MIMs, NIMs, and PIMs may be so equipped), the audio interface type must be selected before channel configuration can continue.

In the Site Channel Configuration List dialog box select the desired site-type interface modules to configure from the Configured/Active Sites list, or add the desired modules from the Configurable Sites list, if not already listed, as described earlier. Choose Modify to display the Audio Interface Type dialog box, select either the Audio Board option button or the T1/E1 Interface Board option button, then choose OK to continue. Choose the Close button to exit the Audio Interface Type dialog box and return to the Site Channel Configuration List dialog box.

Audio Board option

If Audio Board was selected (Figure 14), the Site Channel Configuration dialog box will be displayed. Continue with channel configuration as described in "Audio Board-Equipped Channel Configuration."

3-26