Ericsson LBI-39224 manual Saidxxxx, 124

LBI-39224

is used to define the units, groups, and conventional channels that the console is allowed to program.

CAUTION

Currently dedicated SAID entries are shown in the Group list. These entries should not be privileged for any console. It is recommended that these entries are given a name in the form

SAIDXXXX.

Before privilege lists can be defined System Manager unit and group uploads must be complete (there would be no database to define from otherwise). See Transfer From System Manager, Section 3.6.1, on page 3-17 if this has not been previously completed.

NOTE

At this point in the set up process conventional channels cannot be added to the privilege list for a console because they

have not yet been defined/programmed. Conventional channels are programmed in CONVENTIONAL CHANNEL CONFIGURATION on page 3-148. They can only be added to the privilege lists and console modules after they are programmed.

Privilege lists are defined in the Console Privilege List dialog box,

Figure 29. From the CEC/IMC Manager menu bar select Configure System / Console Configuration / Privilege List to display the Console Privilege List dialog box. Three list boxes of available entities are displayed: Group ID, Unit ID, and Conventional ID, an asterisk at the right of an entry indicates the entity is enabled for programming.

3-124