Ericsson LBI-39224 manual Unpacking, CEC/IMC Manager Requirements, Important Note

LBI-39224

2.CHAPTER 2 INSTALLATION

2.1UNPACKING

After opening this package, verify you have received the following:

–CEC/IMC Manager Version 5.0 for Windows NT software— located on 3-1/2 inch diskettes; this software will be already installed on the computer's hard drive for a new system

–this manual (LBI-39224)

2.2CEC/IMC MANAGER REQUIREMENTS

The following minimum hardware and software configuration is required to operate the CEC/IMC Manager V5.0x.

A.An IBM® Compatible PC with a 75 MHz Pentium® microprocessor (or better) running Microsoft® Windows NT V3.51 (or better) with the following minimum configuration:

–Service Pack #3 or better installed

–At least 16 Mbytes of RAM

–A 540 Mbyte hard disk

–Two (2) serial ports

B.VGA video card and monitor (or better).

IMPORTANT NOTE!

Ensure that the MIGRATE.BAT utility supplied with the "CEC/IMC Manager Version 5.0 for Windows NT" software is executed to save that original (DOS) CEC/IMC Manager configuration BEFORE installing Windows NT on any computer already running a DOS version of the CEC/IMC Manager.

2-1