Ericsson LBI-39224 manual Console Configuration, Caller ID, Multiple Jessica PBX Gateways

LBI-39224

Caller ID

This feature allows Caller ID on inbound interconnect calls. This is done by assigning a "LID" to each telephone line. The NIM will now track phone calls by searching the channels for the active phone line to pick up radio keys/unkeys. This feature is presently not supported in the Site Controller or GETC interface to accept caller based CTIS drops. It also requires Jessica software and configuration changes to assign IDs to phone lines. When this feature is enabled the caller ID is sent to the site instead of 16383 system ID.

Multiple Jessica PBX Gateways

Use this option when an EDACS system that is "StarGated" has more than one Jessica connected at multiple IMCs. This option will cause caller based drops to be sent to the site, and when this feature is enabled the caller ID is sent to the site instead of the 16383 system ID.

3.11 CONSOLE CONFIGURATION

Console configuration consists of CIM channel configuration, setting up console user profiles, C3 Maestro console hardware configuration, establishing privilege lists, C3 Modular/Desktop console configuration, and viewing patch/simulselects. Each CEC/IMC can support up to 32

consoles. From the CEC/IMC Manager menu bar select Configure System / Console Configuration to display the Console Configuration menu, shown in Figure 24. CIM channel configuration is done from CEC/IMC Configuration as described in the following section (Section 3.11.1).

3-104