Ericsson LBI-39224 manual Configure Privilege Lists, Unselect All, 125

LBI-39224

Figure 29 Console Privilege List Dialog Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

Configure Privilege Lists

Although only Unit privilege list definition is discussed in the following paragraph, Group and Conventional privileges are defined the same way as Unit privileges.

Select the console to define privilege list for from the list box in the top center of the dialog box. To define the unit privilege list database for the selected console select the desired unit from the Unit ID list box using the selection cursor, the unit ID of the selected unit will be displayed opposite Unit ID above this list box. Press Enter to change the selected unit to the opposite status, i.e. a programmable unit will now be not programmable, and vice-versa; double-clicking the unit will also toggle it to the opposite status. The entire unit database may be scrolled through to determine which are programmable and which are not. To reprogram a large number of units see the following discussion for the Unselect All and Select All buttons. Different consoles may have different privilege lists.

Unselect All

Choose the Unselect All button to disable all units from being programmed. All the asterisks on the right should disappear. This function is handy when only a limited number of units will be allowed to be programmed. Now only the few units allowed to be programmed must be modified.

3-125