Ericsson LBI-39224 manual Starting the Program, Default User Account

LBI-39224

3.CHAPTER 3

OPERATION AND CONFIGURATION

The primary intent of this chapter is to describe CEC/IMC Manager program operation, and valid CEC/IMC Manager and CEC/IMC Digital Audio Switch configuration settings. In some cases detailed system- level information is presented where necessary. This chapter is arranged in the order recommended for the set-up of a new CEC/IMC Digital Audio Switch. Refer to the set-up information within LBI-38938 and other referenced documents for additional information as necessary.

3.1 STARTING THE PROGRAM

This chapter assumes that program software loading and system hookups have been completed. The program software is installed at the factory for new systems; however, refer to Section 2.7, SYSTEM HOOK-UP of the previous chapter if system hookup has not been accomplished.

3.1.1 Default User Account

From the Windows NT Program Manager open the CEC/IMC Manager program and the CEC/IMC Manager main menu (Figure 1) will be displayed.

The bottom status bar displays several messages that are helpful or important to the CEC/IMC Manager user. "For Help, press F1" or the current menu choice and the current time are displayed at each end of the status bar. System status—"No System Errors" or "System Errors"—and Link status—"Mom Link is Up" or "Mom Link is Down"—provide the user with important information concerning system operation.

3-1