Ericsson LBI-39224 manual Unit Location by Site, Group Location, 196

LBI-39224

narrower search parameters. Choose the Send Location Request button to execute the specified search. The Unit Locations will be displayed in the list box with their Last Known Location—Group Alias, GID, Site Alias, and (Site) ID.

Unit Location by Site

When the site is known but the unit is unknown this option can be used to obtain a list of all units on a particular site. The list can also be filtered to display only units that are logged onto a particular group or display all units in all groups on the site of interest. Select the desired combination of Site and Group from the two drop-down list boxes (Site Alias & ID and Group Alias & GID) and then choose the Apply Grp/Site Filter button.

Select the Unit Location By Site option button, select the Site of interest and a single Group or All Groups from their drop-down lists, then choose the Apply Grp/Site Filter button to initiate the specific search parameters. Choose the Send Location Request button to execute the specified search. The Unit Locations will be displayed in the list box with their Last Known Location—Group Alias, GID, Site Alias, and (Site) ID.

If All Groups was selected as the Group search parameter the Unit Count for the NO GROUP field will display zero, even though many units may be displayed from the search, because this field displays only those units belonging to a single particular Group selected in the Group drop-down list. Also, a "NO GROUP: Unit Count is INVALID" message will be displayed between the Site and Group drop-down list boxes for the same reason. If a single Group was selected for a search parameter, the Unit Count for <selected group> field will display the number of units found with the specified search parameters, and no message will be displayed between these list boxes.

Group Location

Group locations are defined as the number of units logged into the group of interest for each site. Unless the count of units in a group is zero, calls will always be routed to a secondary site if the site is wide area enabled. Select the group and site of interest from the Group and Site drop-down list boxes.

Select the Group Location option button, then select the Group of interest and a single Site or All Sites from their drop-down lists.

3-196