Ericsson LBI-39224 manual Command Unit Logout, Location Request

LBI-39224

3.20.2 Command Unit Logout

The command logout function allows the operator to logoff a specified unit instantly, without waiting for the inactivity logout. The unit can be selected from the list box or manually entered (see below). This procedure can be repeated for as many units as necessary.

Manual Entry

Manual entries also can be made for command unit logout. These allow the operator to immediately jump to a unit that has a known LID or ALIAS by typing the LID or ALIAS in the appropriate Manual Entry text box instead of scrolling through the list of Aliases. Enter either the Unit Alias or LID and press the Tab key.

Send Command Logout

Choose the Send Command Logout button when any unit that must to be logged off immediately is selected. The selected unit will be logged off of the CEC/IMC, and the CEC/IMC Manager will update to show this change in unit location when Send Command Logout is executed.

3.20.3 Location Request

Three location request options are available; unit location, unit location by site, and group location. The location response from the MOM Controller Board for these requests is also sent to the System Manager.

Send Location Request

Choose the Send Location Request button when the desired unit, site, and group are selected in their respective list boxes, and the appropriate location request option button has been selected to update the unit database window with the location responses from the MOM Controller Board.

Clear ALL Location Data

Choose the Clear ALL Location Data button to clear the list box display of all location data. This can be done whenever the operator wishes to remove old data from the list box and display new or no data.

Apply Grp/Site Filter

Choose the Apply Grp/Site Filter button to "filter" a location request through the sites and groups selected in the drop-down list boxes below this button. This allows the operator to control the group and site

3-194