Ericsson LBI-39224 manual Audio Board Equipped NIM Configuration

LBI-39224
selecting	T1/E1	Interface	will	activate	the
T1/E1 Digital Site Configuration dialog			box.	These options	are
discussed in detail in subsequent sections.

Audio Board Equipped NIM Configuration

This section describes configurations for channels within Audio Board- equipped NIMs. All channel parameters are configured from the (NIM) Site Channel Configuration dialog box, Figure 21. Only those NIMs which were selected in the Site Channel Configuration List dialog box are available for channel configuration. Select the desired NIMs to configure from the Configured/Active Sites list, or add the desired NIMs from the Configurable Sites list, if not already listed, as described earlier. Choose Modify and the Audio Interface Type dialog box, Figure 14 on page 3-27, will be displayed, select the Audio Board option, then choose OK to display the Site Channel Configuration dialog box, Figure 21. The selected NIMs are displayed in a list box at the top center of the dialog box. Audio Board-equipped NIMs require less settings than Audio Board-equipped MIM, VMIM and PIM interface modules.

Figure 21 NIM Site Channel Configuration Dialog Box

Help

Choose the Help button to access the Help function. (Help is also available by pressing the F1 key.)

3-50