Cisco Systems VPN 3002 manual Menu Reference, Main Menu, 1Configuration, 14-7

Chapter 14 Using the Command-Line Interface

Menu Reference

Menu Reference

This section shows all the menus in the first three levels below the main menu. (There are many additional menus below the third level; and within the first three levels, there are some non-menu parameter settings. To keep this chapter at a reasonable size, we show only the menus here.)

The numbers in each heading are the keyboard shortcut to reach that menu from the main menu. For example, entering 1.3.1 at the main menu prompt takes you to the Configuration > System Management> IP Routing menu.

Note The menus and options, and thus the keyboard shortcuts, might change with new software versions. Please check familiar shortcuts carefully when using a new release.

Main Menu

1)Configuration

2)Administration

3)Monitoring

4)Save changes to Config file

5)Help Information

6)Exit

Main -> _

1Configuration

1)Quick Configuration

2)Interface Configuration

3)System Management

4)Policy Management

5)Back

Config -> _

1.1 Configuration > Quick Configuration

See the VPN 3002 Hardware Client Getting Started guide for complete information about Quick Configuration.

1.2 Configuration > Interface Configuration

This table shows current IP addresses.

..

1)Configure the Private Interface

2)Configure the Public Interface

3)Back

Interfaces -> _

VPN 3002 Hardware Client Reference

OL-1893-01 14-7