Cisco Systems VPN 3002 manual PAT Enabled, 11-7, Apply/Cancel, Reminder

Chapter 11 Policy Management

Configuration Policy Management Traffic Management PAT Enable

PAT Enabled

Check the box to enable Client Mode (PAT), or clear it to enable Network Extension Mode.

Note Remember that to use Network Extension Mode, you must configure an IP address other than the default for the private interface. If you do not change the IP address of the private interface, you can not disable PAT.

Apply/Cancel

To enable or disable PAT, and include your setting in the active configuration, click Apply. The Manager returns to the Configuration Policy Management Traffic Management PAT screen.

Reminder:

To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.

To discard your entry and leave the active configuration unchanged, click Cancel. The Manager returns to the Configuration Policy Management Traffic Management PAT screen.

VPN 3002 Hardware Client Reference

OL-1893-01 11-7