Cisco Systems VPN 3002 manual Enable XML, 8-16, Enable HTTPS on Public, Management Protocols

Chapter 8 Management Protocols

Configuration System Management Protocols XML

Configuration System Management Protocols XML

This screen lets you configure the VPN 3002to support an XML-based interface. Enabling XML management (the default condition) allows the VPN 3002 to be more easily managed by a centralized management system. XML is enabled by default. To disable the XML option, clear the check box. To reenable the XML option, click the check box.

On this screen, you can also configure the VPN 3002 to enable HTTPS or SSH (or both) on the public interface and to lock the XML interface to a specific HTTPS or SSH IP address.

Figure 8-16 Configuration System Management Protocols XML Screen

Enable XML

Check the Enable check box, the default, to enable the XML management capability. You must also enable HTTPS or SSH on the VPN 3002 public interface. Disabling the XML management capability is not recommended.

Enable HTTPS on Public

Check the Enable HTTPS on Public check box to allow XML management over HTTPS on the VPN 3002 public interface.

VPN 3002 Hardware Client Reference

8-16 OL-1893-01