Cisco Systems VPN 3002 Monitoring Statistics HTTP, Protocol Use Failures, 13-22, No-SAFailures

Chapter 13 Monitoring

Monitoring Statistics HTTP

System Capability Failures

The total number of system capacity failures that occurred during processing of all currently and previously active IPSec Phase-2 tunnels. These failures indicate that the system has run out of memory or some other critical resource; check the event log.

No-SA Failures

The cumulative total of nonexistent-Security Association failures which occurred during processing of all currently and previously active IPSec Phase-2 tunnels. These failures occur when the system receives an IPSec packet for which it has no Security Association, and might indicate synchronization problems.

Protocol Use Failures

The cumulative total of protocol use failures that occurred during processing of all currently and previously active IPSec Phase-2 tunnels. These failures indicate errors parsing IPSec packets.

Monitoring Statistics HTTP

This screen shows statistics for HTTP activity on the VPN 3002 since it was last booted or reset.

To configure system-wide HTTP server parameters, see the Configuration System Management Protocols HTTP screen.

Figure 13-10 Monitoring Statistics HTTP Screen

	VPN 3002 Hardware Client Reference
13-22	OL-1893-01