Cisco Systems manual Enable Telnet, Management Protocols, VPN 3002 Hardware Client Reference

Chapter 8 Management Protocols

Configuration System Management Protocols Telnet

Figure 8-3 Configuration System Management Protocols Screen

Configuration System Management Protocols Telnet

This screen lets you configure and enable the VPN 3002 Telnet terminal emulation server, and Telnet over SSL (Secure Sockets Layer protocol). When the server is enabled, you can use a Telnet client to communicate with the VPN 3002. You can fully manage and administer the VPN 3002 using the Cisco Command Line Interface (CLI) via Telnet.

Telnet server login usernames and passwords are the same as those enabled and configured on the Administration Access Rights Administrators screens.

Telnet/SSL uses a secure, encrypted connection. This enabled by default for Telnet/SSL clients.

See the Configuration System Management Protocols SSL screen to configure SSL parameters. See the Administration Certificate Management Certificates screen to manage the SSL digital certificate.

Figure 8-4 Configuration System Management Protocols Telnet Screen

Enable Telnet

Check the box to enable the Telnet server. The box is checked by default. Disabling the Telnet server provides additional security, but doing so prevents using the Cisco CLI via Telnet.

VPN 3002 Hardware Client Reference

8-4 OL-1893-01