Cisco Systems VPN 3002 manual Remote Server, Backup Servers

Chapter 6 Tunneling

Configuration System Tunneling Protocols IPSec

–DES-56

–3DES-168

•Extended Authentication (XAuth)

•Mode Configuration (also known as ISAKMP Configuration Method)

•Tunnel Encapsulation Mode

Figure 6-2 Configuration System Tunneling Protocols IPSec Screen

Remote Server

Enter the IP address or hostname of the remote server. This is the IP address or hostname of the public interface on the VPN Concentrator to which this VPN 3002 connects. Use dotted decimal notation; for example, 192.168.34.56. To enter a hostname, a DNS server must be configured.

Backup Servers

To configure IPSec backup servers on the VPN 3002, enter up to 10 backup servers, using either IP address or hostname. Enter each backup server on a separate line. To enter a hostname, a DNS server must be configured. Further, if you use hostnames and the DNS server is unavailable, significant delays can occur.

VPN 3002 Hardware Client Reference

OL-1893-01 6-3