Cisco Systems VPN 3002 manual Enable Telnet/SSL, Telnet Port, Telnet/SSL Port, Maximum Connections

Chapter 8 Management Protocols

Configuration System Management Protocols Telnet

Enable Telnet/SSL

Check the box to enable Telnet over SSL. The box is checked by default. Telnet/SSL uses Telnet over a secure, encrypted connection.

Telnet Port

Enter the port number that the Telnet server uses. The default is 23, which is the well-known port number.

Telnet/SSL Port

Enter the port number that Telnet over SSL uses. The default is 992, which is the well-known port number.

Maximum Connections

Enter the maximum number of concurrent, combined Telnet and Telnet/SSL connections that the server allows. Minimum is 1, default is 5, maximum is 10.

Apply / Cancel

To apply your Telnet settings, and to include the settings in the active configuration, click Apply. The Manager returns to the Configuration System Management Protocols screen.

Reminder:

To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.

To discard your settings, click Cancel. The Manager returns to the Configuration System Management Protocols screen.

Figure 8-5 Configuration System Management Protocols Screen

VPN 3002 Hardware Client Reference

OL-1893-01 8-5