Cisco Systems VPN 3002 manual Apply / Cancel, Duplex, Reminder

Chapter 3 Interfaces

Configuration Interfaces Public

Duplex

If you are using static IP addressing, click the drop-down menu button and select the interface transmission mode:

•Auto = Let the VPN 3002 automatically detect and set the appropriate transmission mode, either full or half duplex (default). Be sure that the port on the active network device (hub, switch, router, etc.) to which you connect this interface is also set to automatically negotiate the transmission mode. Otherwise, select the appropriate fixed mode.

•Full-Duplex= Fix the transmission mode as full duplex: transmits and receives at the same time.

•Half-Duplex= Fix the transmission mode as half duplex: transmits or receives, but not at the same time.

Apply / Cancel

To apply your settings to this interface and include your settings in the active configuration, click Apply. The Manager returns to the Configuration Interfaces screen.

Reminder:

To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.

To discard your settings, click Cancel. The Manager returns to the Configuration Interfaces screen.

VPN 3002 Hardware Client Reference

3-8 OL-1893-01