Cisco Systems VPN 3002 manual Configuration | Interfaces | Private, Disabled, Static IP Addressing

Chapter 3 Interfaces

Configuration Interfaces Private

Configuration Interfaces Private

This screen lets you configure parameters for the private interface. It displays the current parameters, if any.

Figure 3-2 Configuration Interfaces Private Screen

Caution If you modify any parameters of the private interface that you are currently using to connect to the VPN 3002, you will break the connection, and you will have to restart the Manager from the login screen.

Disabled

To make the interface offline, click Disabled. This state lets you retain or change its configuration parameters.

If the interface is configured but disabled (offline), the appropriate Ethernet Link Status LED blinks green on the VPN 3002 front panel.

Static IP Addressing

To change the IP address of the private interface, click Static IP Addressing.

IP Address

Enter the IP address for this interface, using dotted decimal notation (for example, 192.168.12.34). Note that 0.0.0.0 is not allowed. Be sure no other device is using this address on the network.

VPN 3002 Hardware Client Reference

3-4 OL-1893-01