Cisco Systems VPN 3002 manual Static Routes, Add / Modify / Delete, Reminder, IP Routing

Chapter 7 IP Routing

Configuration System IP Routing Static Routes

Configuration System IP Routing Static Routes

This section of the Manager lets you configure static routes for IP routing.

Figure 7-2 Configuration System IP Routing Static Routes Screen

Static Routes

The Static Routes list shows manual IP routes that have been configured. The format is [destination network address/subnet mask -> outbound destination]; for example, 192.168.12.0/255.255.255.0 -> 10.10.0.2. If you have configured the default gateway, it appears first in the list as [Default -> default router address]. If no static routes have been configured, the list shows --Empty--.

Add / Modify / Delete

To configure and add a new static route, click Add. The Manager opens the Configuration System IP Routing Static Routes Add screen.

To modify a configured static route, select the route from the list and click Modify. The Manager opens the Configuration System IP Routing Static Routes Modify screen. If you select the default gateway, the Manager opens the Configuration System IP Routing Default Gateways screen.

To delete a configured static route, select the route from the list and click Delete. There is no confirmation or undo. The Manager refreshes the screen and shows the remaining static routes in the list. You cannot delete the default gateways here; to do so, see the Configuration System IP Routing Default Gateways screen.

Reminder:

The Manager immediately includes your changes in the active configuration. To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.

VPN 3002 Hardware Client Reference

7-2 OL-1893-01