Cisco Systems VPN 3002 Configuration Policy Management Traffic, Management | PAT, 11-6, Enable

Chapter 11 Policy Management

Configuration Policy Management Traffic Management PAT

PAT

To configure PAT (Port Address Translation) click PAT.

Configuration Policy Management Traffic

Management PAT

The Configuration Policy Management Traffic Management PAT screen displays.

Figure 11-3 Configuration Policy Management Traffic Management PAT Screen

PAT mode provides many-to-one translation; that is, it translates many private network addresses to the single address configured on the public network interface.

Enable

To enable PAT, click Enable.

Configuration Policy Management Traffic Management PAT Enable

This screen lets you enable or disable PAT, which applies PAT to all configured traffic flowing from the private interface to the public interface.

Figure 11-4 Configuration Policy Management Traffic Management PAT Enable Screen

VPN 3002 Hardware Client Reference

11-6 OL-1893-01