Cisco Systems VPN 3002 Configuration | System | General | Time and Date, Current Time, New Time

Chapter 10 General

Configuration System General Time and Date

Configuration System General Time and Date

This screen lets you set the time and date on the VPN 3002. Setting the correct time is very important so that logging information is accurate.

Figure 10-3 Configuration System General Time and Date Screen

Current Time

The screen shows the current date and time on the VPN 3002 at the time the screen displays. You can refresh this by redisplaying the screen.

New Time

The values in the New Time fields are the time and date on the browser PC at the time the screen displays. Any entries you make apply to the VPN 3002, however.

In the appropriate fields, make any changes. The fields are, in order: Hour : Minute : Second Month / Day / Year Time Zone. Click the drop-down menu buttons to select Month, and Time Zone. The time zone selections are offsets in hours relative to GMT (Greenwich Mean Time), which is the basis for Internet time synchronization. Enter the Year as a four-digit number.

Enable DST Support

To enable DST support, check the box. During DST (Daylight-Saving Time), clocks are set one hour ahead of standard time. Enabling DST support means that the VPN 3002 automatically adjusts the time zone for DST or standard time. If your system is in a time zone that uses DST, you must enable DST support.

Apply/Cancel

To apply your time and date settings, and to include your settings in the active configuration, click Apply. The Manager returns to the Configuration System General screen.

VPN 3002 Hardware Client Reference

OL-1893-01 10-3