NEC N 1093100 software manual To enable Ringing Line Preference for the extension

Ringing Line Preference

	Keyset		Attendant
Feature	RLP = Y	RLP = N	RLP = Y	RLP = N
	Does pressing SPEAKER while in the Headset mode
		answer the ringing call?
Intercom (page 211)	Yes	Yes	No1	No1
Ringing Intercom calls
Key Ring (page 214)	Yes	No	Yes	No
(Line/Loop Keys)
Transfer (page 358)	Yes	No	Yes	No
Direct Inward Line (page 109)	Yes	No	Yes	No
Group Ring (page 189)	Yes	Yes	N/A	N/A
Extension Hunting (page 154)	Yes	Yes	No1	No1
(Call to UCD master)
Call Coverage Keys (page 40)	No	No	No	No
Group Call Pickup (page 184)	No	No	No	No

1Ringing Line Preference will not answer a call ringing the Operator Call Key.

When multiple calls ring an extension simultaneously, the system services the ringing calls in the follow- ing order:

1.INTERCOM Key

2.Line Key (from lowest to highest)

3.Loop Key (from lowest to highest)

In addition, if two extensions with Ringing Line Preference answer the same outside call simultaneously, the system connects the call to the lowest numbered extension.

Prime Line vs. Ringing Line Preference

Ringing Line Preference has priority over Prime Line. For example, an extension with Ringing Line Prefer- ence will answer a ringing line, not get dial tone on their Prime Line. In addition, a ringing Prime Line will have priority over any other ringing line. The seize priority is as follows:

❥Ringing Prime Line

❥Ringing non-Prime Line

❥Prime Line

Conditions

• None

Default Setting

• Enabled

Programming

1.To enable Ringing Line Preference for the extension:

1. In 2111-04: Ringing Line Preference (page 732), enter Yes.

296 ◆ Features DSX Software Manual