NEC P 16xx-Timers, 160x-FeatureTimers, Description, Options, OutgoingCall Timers, System, Default

16xx-Timers

160x-Feature Timers

1602-Outgoing Call Timers

1602-Outgoing Call Timers

Description

Use this program to adjust timers that affect outgoing calls.

Options

1602-01: Interdigit Timer

(Interdigit Time)

Use this option to set the Intercom interdigit time. When an extension user places a call, they must dial each succeeding digit within this interval.

Features

•Central Office Calls, Placing (page 78)

•Directory Dialing (page 131)

•Intercom (page 211)

IntraMail Features

• None

Options

• 1-9999seconds

Default

• 6 seconds

1602-02: Line Response Timer

(Line Response)

When the system sends a line seize message to the ATRU/COIU PCB, it waits this interval for a response from the line PCB. If the system gets no response within this interval, it marks the line as defective. Be sure the value you enter is compatible with the local telco. If you set this value too short, the system may mark properly functioning lines as defective. If too long, defective lines may be left in service.

Features

• N/A

IntraMail Features

• None

Options

• 4-1020in 100 mS intervals (e.g., 10 = 1 second, 100 = 10 seconds).

Default

• 100 (10 seconds)

1602-03: Dialtone Detect Timer

(Dialtone Detect)

When the system seizes a line to place a Speed Dial call, it waits this interval for dial tone before outdialing the call. The system requires that the first dial tone be at least 5 seconds long and the second dial tone to be at least 2.5 seconds long. Be sure the value you enter is compatible with the local telco. If you set this value too short, the system may not seize properly functioning lines. If too long, there will be too long a delay before the system skips over a defective line.

Features

•Speed Dial (page 315)

IntraMail Features

• None

System 1001-1702

DSX Software Manual System Options: 1001-1702 ◆ 671