Flash for Single Line Extensions

Flash

Description

Extension users can access certain CO and PBX features by interrupting line loop current.

Flash allows an extension user to access certain CO and PBX features by interrupting line loop current. Flash lets an extension user take full advantage of whatever features the connected telco or PBX offers. You must set the Flash parameters for compatibility with the connected telco.

The Class of Service option 1403-01: Flash for Single Line Set (page 635) allows you to enable or disable hookﬂash for analog single line extensions. If enabled (Y), a single line extension can hookﬂash normally and use any of the associated system features. If disabled (N), hookﬂash is prevented. This means the analog exten- sion can not use any features that require a hookﬂash (such as Hold, Conference, or Transfer). This may be helpful for lobby phones and single line Ringdown Extensions that should not have access to system features.

When 1403-01: Flash for Single Line Set (page 635) is enabled (Y):

❥A single line extension user cannot seize an outside line and hookﬂash without dialing. If they do, the system will disconnect the initial outside call.

❥If a single line extension user hookﬂashes to place their current outside call on Hold and then hangs up, the outside call will immediately recall the extension.

The option is ignored for voice mail ports.

Conditions

• None

Default Setting

• Enabled

Programming

1.Check the setting of the system’s Flash timer.

1.In 1612-04: PBX/Centrex Flash Timer (page 686), set the timer for compatibility with the connected Centrex or PBX.

2.Should a single line extension be able to hookﬂash?

1.In 2102-01: Class of Service (page 724), check the extension’s Class of Service level.

2.If yes, in 1403-01: Flash for Single Line Set (page 635) enter Yes.

3.If no, in 1403-01: Flash for Single Line Set (page 635) enter No.

Features

DSX Software Manual

Features ◆ 177

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.

NEC P Flash for Single Line Extensions, Check the setting of the system’s Flash timer

Models: P N 1093100

Flash

Description