NEC N 1093100 Programming and Dialing Personal Speed Dial, Features, DSX Software Manual

Models: P N 1093100

1 984
Download 984 pages 47.76 Kb
Page 350
Image 350
To dial a stored Personal Speed Dial number:

Speed Dial

 

 

 

 

 

 

 

 

Programming and Dialing Personal Speed Dial

In these instructions:

 

 

 

[Super Display Soft Key]

 

 

 

 

[Keyset Soft Key]

 

 

 

 

 

 

b.

 

Enter the Line Group number you want the system to use when dialing your stored number (90-98).

 

 

 

 

 

 

c.

 

Press INTERCOM if you want to enter Intercom codes.

 

 

 

 

 

 

6.

Press HOLD.

 

 

 

 

 

7.

Enter the number you want to store (up to 32 digits long).

 

 

• If storing Intercom codes, you can enter a valid dial sequence using the digits 0-9, #, and *.

 

• To insert a pause, press MUTE. To insert a Flash, press FLASH.

 

 

• Do not enter a pause or flash into an Intercom code.

 

 

 

 

8.

Press HOLD twice.

 

 

 

 

9.

Enter a name for the Speed Dial number.

 

 

• See Name Programming Chart (page 322) for more.

 

 

 

 

 

10.

Press HOLD.

 

 

 

 

 

11.

Do one of the following.

 

 

 

 

 

 

a.

 

Repeat from step 3 to program another bin.

 

 

 

 

 

 

 

b.

 

Press SPEAKER to exit.

 

 

 

 

 

 

 

To dial a stored Personal Speed Dial number:

 

 

 

 

 

1.

Do one of the following.

 

 

 

 

 

 

a.

 

Press INTERCOM, dial #, then dial the Personal Speed Dial bin number (701-720).

 

 

 

 

 

 

b.

 

24-Button or 34-Button Telephone Only

 

 

 

Press bin key for bins 701-710.

 

 

 

 

 

 

 

 

 

 

 

c.

 

Press a Feature Key set up as a Personal Speed Dial key.

 

 

 

 

 

 

 

d.

 

Super Display Telephone Only

 

 

 

• Press Spd Dial 1 (bins 701-710) or Spd Dial 2 (bins 711-720).

 

 

 

 

• Press the soft key for the number you want to dial.

 

 

 

 

 

2.

 

 

• To chain bins, wait for the first bin to dial out, then press a bin key or Feature Key.

(Optional)

 

• If the programmed route is busy, press an idle line key to reroute the call.

 

 

 

 

• You cannot chain Intercom numbers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programming and Dialing System Speed Dial

In these instructions:

 

 

 

[Super Display Soft Key]

 

 

 

 

[Keyset Soft Key]

 

 

 

 

 

Forced Account Codes may prevent Speed Dial from dialing 911 emergency services.

 

 

 

To program a System Speed Dial number:

 

 

 

 

1.

Do not lift the handset or press any keys.

 

 

 

 

2.

Dial #SP (#77).

 

 

 

 

3.

Dial the System Speed Dial bin number (normally 201-299).

 

 

 

 

 

4.

Press HOLD.

 

 

 

 

 

5.

Do one of the following.

 

 

 

 

 

 

320 Features

DSX Software Manual

Page 350
Image 350
NEC N 1093100 Programming and Dialing Personal Speed Dial, To dial a stored Personal Speed Dial number, Features