NEC P, N 1093100 software manual Transfer

				Transfer
	Operation
			Using Transfer	In these instructions:
				[Super Display Soft Key]
				[Keyset Soft Key]
To Transfer your call:
1.		Do not hang up.
2		Press TRANSFER.
3.		Do one of the following.
			Dial your co-worker’s extension.
		a.	• To Transfer your call directly to your co-worker’s mailbox, do this instead:
			- Press V-MAIL.
			- Dial their extension number.
			- Hang up.
		b.	Press a DSS key.
		c.	Dial a Ring Group or UCD Group master number.
		d.	Press a Call Coverage or Hotline key.
			• If you have Hotline Automatic Transfer, you don’t have to press TRANSFER before your Hot-
			line key.
4.		Do one of the following.
		a.	Announce call to make a Screened Transfer, then hang up.
		b.	Press the flashing line key to return to the call if your co-worker doesn’t want it.
		c.	Hang up to send the call through unscreened.
			• The call will recall to you if unanswered by your co-worker. If you don’t answer the recall, the
			call diverts to Key Ring.
		d.	Press V-MAILto Transfer the call to your co-worker’s mailbox.
5.		If the transferred call is not picked up (i.e., recalls), you see one of the following.
		a.	If the extension that transferred the call doesn’t have a name:
			Transfer Recall
			STA 301
		b.	If the extension that transferred the call has a programmed name:
			Transfer Recall
			300: Attendant

Features

DSX Software Manual Features ◆ 365