NEC P Toll Restriction, 1+ Long Distance Dialing Restrictions, Features, DSX Software Manual

Toll Restriction

2.If no, in 352x-1010-XXX / Local XXX (Equal Access Dialing) (page 844) change the table to an allow table with no entries. This blocks all 1010 + XXX dialing.

1+ Long Distance Dialing Restrictions

1.Do you want to allow 1 + NPA or 1 + NXX dialing?

1.If yes, in 353x-1+XXX /TBL-A XXX (NPA/NXX Dialing 3-Digit Table) (page 846) set up the table.

-Be sure to initialize the table before programming it for the first time.

-You can make the table a deny table and enter just the codes you want to restrict, or

-You can make the table an allow table and enter just the codes you want to allow.

-By default, this type of dialing is allowed because the table is a deny table with no entries (i.e., it denies nothing).

2.If no, in 353x-1+XXX /TBL-A XXX (NPA/NXX Dialing 3-Digit Table) (page 846) change the table to an allow table with no entries. This blocks all 1 + NPA/NXX dialing.

2.Do you want to have additional 6-digit (1 + NPA + NXX) dialing restriction?

1.If yes, in 354x-1+XXX-XXX /TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-Digit Table) (page 848) set up the table.

-Be sure to initialize the table before programming it for the first time.

-You can make the table a deny table and enter just the codes you want to restrict, or

-You can make the table an allow table and enter just the codes you want to allow.

-By default, there is no 6-digit restriction because the table is a deny table with no entries (i.e., it denies nothing). The 1 + restriction is handled by the 1 + 3-digit table.

2.If no, in 354x-1+XXX-XXX /TBL-A XXXXXXX (1 + NPA + NXX Dialing 6-Digit Table) (page 848) change the table to a deny table with no entries. This provides no 6-digit restriction.

Long Distance Dialing Restrictions

1.Do you want to allow NPA or NXX dialing?

1.If yes, in 355x-XXX /TBL-B-XXX (NPA/NXX Dialing 3-Digit Table) (page 850) set up the table.

-Be sure to initialize the table before programming it for the first time.

-You can make the table a deny table and enter just the codes you want to restrict, or

-You can make the table an allow table and enter just the codes you want to allow.

-By default, this type of dialing is allowed because the table is a deny table with no entries (i.e., it denies nothing).

2.If no, in 355x-XXX /TBL-B-XXX (NPA/NXX Dialing 3-Digit Table) (page 850) change the table to an allow table with no entries. This blocks all 1 + NPA/NXX dialing.

2.Do you want to have additional 6-digit (NPA + NXX) dialing restriction?

1.If yes, in 356x-XXX-XXX /TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table) (page 852) set up the table.

-Be sure to initialize the table before programming it for the first time.

-You can make the table a deny table and enter just the codes you want to restrict, or

-You can make the table an allow table and enter just the codes you want to allow.

-By default, there is no 6-digit restriction because the table is a deny table with no entries (i.e., it denies nothing). The restriction is handled by the 3-digit table.

2.If no, in 356x-XXX-XXX /TBL-B XXXXXX (NPA + NXX Dialing 6-Digit Table) (page 852) change the table to a deny table with no entries. This provides no 6-digit restriction.

Features

DSX Software Manual Features ◆ 355