Door Box

Conditions

Door Box P/N 922450 is a weather-tight unit, and can be mounted outside. It has an operating temper- ature range of -20 to 60 degrees C (-4 to 140 degrees F) and a relative humidity of 10-95%, non-con- densing.

Default Setting

In DSX 80/160, no Door Boxes are enabled.

In DSX-40, the built-in Door Box ports are enabled for extensions 326 (DOOR 1) and 327 (DOOR 2).

Programming

Basic Door Box Programming

1.Use Ring Group programming to set which extensions ring for calls from a Door Box.

1.In 2113-02: Ring Group (page 738), assign the Door Box extension and each telephone extension to the same Ring Group (1-8). (DSX-40 “built-in” Door Box extensions are 326 and 327.)

-For example, if extensions 301 and 302 should ring for calls from Door Box 309, be sure 301, 302, and 309 are in the same Ring Group.

-Multiple Door Boxes can be in the same Ring Group.

2.Set the chime pattern and review the operation of each Door Box.

1.In 2101-04: Door Chime Selection (page 722), set the chime pattern (0-3) for each Door Box extension. (DSX-40 “built-in” Door Box extensions are 326 and 327.)

-0 for Normal Ring Group ringing

-1 for Low pitch chime pattern

-2 for Mid range chime pattern

-3 for High pitch chime pattern

2.More on Chime 0 Operation:

-Chime 0 rings for 60 seconds and then cancels.

-An extension user can answer the Door Box any time while it is ringing.

-The Door Box user can press the call button again any time after ringing stops, or if an extension user answers their call and then hangs up.

-The Door Box user cannot hang up (disconnect) their call.

3.More on Chime 1-3 Operation:

-Chimes 1-3 ring for 5 seconds and then stop.

-An extension user can answer the Door Box any time within 30 seconds after the chime starts.

-After 30 seconds, the Door Box call automatically cancels.

-The Door Box user can press the call button again any time after the chime stops, or if an extension user answers their call and then hangs up.

-The Door Box user cannot hang up (disconnect) their call.

148 Features

DSX Software Manual

Page 178
Image 178
NEC N 1093100 software manual Basic Door Box Programming

P, N 1093100 specifications

The NEC P,N 1093092,1093092 is a high-performance electronic component renowned for its versatility and advanced technology. As part of NEC's extensive portfolio, this component is designed to meet the demanding requirements of various industries, including telecommunications, automotive, and consumer electronics.

One of the main features of the NEC P,N 1093092,1093092 is its impressive operational efficiency. This component offers low power consumption without compromising performance, making it an ideal choice for battery-operated devices and energy-sensitive applications. Its ability to function effectively at low voltage levels further enhances its appeal, allowing manufacturers to design smaller, more efficient products.

Another key characteristic of the NEC P,N 1093092,1093092 is its robust reliability and durability. With a temperature range that can withstand extreme conditions, the component ensures consistent performance even in harsh environments. This reliability is critical for applications in sectors like automotive, where components are often subject to vibrations, temperature fluctuations, and other stress factors.

Moreover, the NEC P,N 1093092,1093092 integrates advanced semiconductor technology that enables high frequency and high-speed processing capabilities. This feature makes it suitable for applications requiring fast data transmission, such as in telecommunications infrastructure and data centre operations. As technology continues to evolve, the demand for components that can handle high data rates becomes increasingly important, and the NEC P,N 1093092,1093092 is well-equipped to meet these needs.

In terms of design, the component boasts a compact form factor, which facilitates integration into various hardware configurations. This flexibility allows engineers and designers to utilize the NEC P,N 1093092,1093092 in diverse applications while maintaining space efficiency in device design.

Finally, the NEC P,N 1093092,1093092 complies with international standards, ensuring that it meets the stringent quality requirements set forth for electronic components. This compliance not only enhances the component's reliability but also simplifies the certification process for manufacturers, making it a strategic choice for projects that require adherence to industry regulations.

In summary, the NEC P,N 1093092,1093092 stands out as a cutting-edge electronic component characterized by its operational efficiency, reliability, processing capabilities, compact design, and compliance with quality standards. Its advanced features make it an essential component for modern electronic applications across various industries.