NEC N 1093100 Central Office Calls, Placing, Using Store and Forward, Features, Feature Name

				Central Office Calls, Placing
		Using Store and Forward
			Feature Name		In these instructions:
					[Super Display Soft Key]
					[Keyset Soft Key]
To place an outside call using Store and Forward:
1.		Do one of the following.
		a.	Press INTERCOM and dial 9.
			• You may optionally be able to dial 90-98.
		b.	Press a Switched Loop key + Dial Line Group number (90-98).
		c.	Press Fixed Loop key.
2.		Dial the outside telephone number.
3.		When you have finished dialing, wait 6 seconds or dial # for the call to go though,
		• The stored number dials out.
			Using Store and Forward and Account Codes		In these instructions:
					[Super Display Soft Key]
					[Keyset Soft Key]
To place an outside call when both Store and Forward and Account Codes are enabled:
	• With Forced Account Codes for Toll Calls Only, you do not have to enter an Account Code for local calls. Just dial
		the call normally.
1.		Do one of the following.
		a.	Press INTERCOM and dial 9 (or optionally 90-98).
		b.	Press Switched Loop key + Dial the Line Group number (90-98).
		c.	Press Fixed Loop key.
2.		Dial the outside telephone number.
3.		Do one of the following.
		a.	Wait for three beeps (Forced Account Codes only).
		b.	[Account Code]	Select Account Code soft key.
			[ACCT]
		c.	Press your Account Code Feature Key.
4.		Enter the Account Code.
5.		Do one of the following.
		a.	Wait 6 seconds.
		b.	[Account Code]	Select Account Code soft key.
			[ACCT]
		c.	Press your Account Code Feature Key.
		d.	Dial #.

Features

DSX Software Manual Features ◆ 85